$3,354.00
$1,677.00

Formed door and rear panel create a chimney effect allowing air to circulate freely from top to bottom. Solid side panels are composed of interlocking aluminum extrusions with guides spaced on 1 - ½” centers for maximum capacity. Units are secured with heavy duty tie rods of ¾” x 1” tube.

Equipped with four 5” platform swivel type heavy duty casters with non - marking wheels, these all welded aluminum carts can be loaded up and easily rolled into place.

Each unit is all welded with all seams fully welded and sealed providing a smooth, easy to clean surface. No cracks or crevices to trap dirt!

All units carry a Lifetime Guarantee against rust and corrosion as well as a Five - Year Guarantee against material defects and workmanship.

APPLICATIONS: General storage and movement of trays and pans.

CONSTRUCTION: Heavy duty, high tensile, extruded aluminum. Type 6063 - T5 alloy.

UPPER FRAME & TOP: The upper frame is constructed of vertical uprights 1” x 2 - ½” x 1 / 8 ” thick extruded aluminum channels with top cross a nd side bracing of 1 - ¼” x 1 - ¼” x .070 wall extruded aluminum tubing , all fully welded together. A solid cap of .063 thick aluminum is welded to uprights and cross bracing.

COMPOUND GUIDES: The compound guides are interlocking solid wall type, extruded al uminum panels. Each panel has a series of guides spaced 1 - ½” on center, with ½” ledges and .090 wall thickness. The guides are welded to the vertical uprights.

REAR PANEL: Rear panel is .080 thick aluminum panel with a corrugation on each side for strengt h and enhanced air circulation. Panel is welded to the top, bottom, and rear vertical uprights.

DOOR: Door consists of 1 / 8 ” thick aluminum panel with a corrugation on each side. The door is supported by three stainless steel hinges designed to provide 27 0º door swing. A positive gravity catch is provided to retain door in a closed position. A universal card holder is bolted to the upper front of the door.

TIE ROD: A ¾” x 1” x .070 wall extruded aluminum tube tie rod is welded to the front vertical uprigh ts for extra rigidity. Model #1291 uses two tie rods, one at each end.

BOTTOM FRAME: Bottom frame is constructed of 1 / 8 ” thick aluminum sheet with four sides bent down 1 - 3 / 8 ”, all corners welded smoothly. Tubular framework welded inside the 1 / 8 ” aluminum sheet for extra rigidity. Caster plates (2 - ¾” x 4 - 3 / 8 ” thick pre - tapped) are welded to bottom of frame.

CASTERS: Four platform type 5” casters , full swivel design with sealed ball bearing axle and non - marking wheels.

  • Also Known As: Enclosed Cabinet, Transport Cabinet, Storage Cabinet, Enclosed Bakery Rack

  • Construction Warranty: 5 Year Warranty

  • Material Warranty: "LIFETIME" Warranty Against Rust and Corrosion

  • NSF: Yes

  • Shipping Weight: 159.00

Dimensions
Length
27.63 in
Width
20.88 in
Height
68 in
Weight
159 lb
Ship Freight Only
Yes
Specifications