• Brand: Jet-Tech
  • Model: XG-37
 Free Shipping
$7,130.00
$5,277.98

The XG-37 has a fill and dump style cycle but the comparisons to traditional fill & dump style machines end there. In addition to the cold water rinse, this glasswasher is specifically designed to align with underbar equipment. It also has a sliding cover for access to glassware, which improves bartender work flow by eliminating the door extending into the aisle.

Standard Features:

  • Fill and dump style cycle uses less water and energy than traditional rotary glasswashers.
  • Conveyor easily lifts out for cleaning access.
  • Drain stopper is controlled by a quiet and reliable gear motor with linkage cam instead of a noisy solenoid valve.
  • Chemical fill is easily visible by sliding the cover open during the fill portion of the wash and rinse cycle.
  • Stationary spray box simply unlatches for easy visual inspection and cleaning.
  • Incoming water line has built-in air gap so no separate vacuum breaker accessory is required.
  • Special mounting bracket allows for easy service access to water recirculating pump.
  • Unit plugs into standard 120V electrical outlet for an easy installation.
  • Computer controlled fill cycle allows for 75°F (24°C) rinse, providing clean glasses that are cool to the touch.
  • The sliding cover and cold water rinse prevent steam from escaping during and after the cycle.
  • Unique drainboard top provides integrated glassware landing area.
  • Exclusive design with side notch provides space for three one-gallon chemical containers within the 24" by 24" foot print.
  • Conveyor advance switch rotates conveyor one-half turn for easy loading and unloading of glassware.
  • Covers and drainboard top are easily removable for cleaning access.
  • Pre-programmed de-liming cycle for easy removal of mineral deposits during maintenance (de-liming agent must be added).
  • Conveyor and stationary spray box are easily removed for cleaning and visual inspection.
  • Automatic peristaltic metering pumps accurately dispense detergent, sanitizer, and rinse aid.

Specifications:

  • General Plumbing
    • Plumb with 1/2" water supply. Adapt to 3/8" FMPT
    • Minimum water pressure is 25 PSI
    • Maximum water pressure is 100 PSI. Install water pressure regulator if line pressure is over 100 PSI. Water valve on unit has built-in strainer and flow control to provide consistent volume between 25 and 100 PSI
    • Install separate water shut-off valve
    • Unit has built-in air gap - vacuum breaker is not required
    • Consumption is 3 gallons per cycle
  • Hot Water Supply
    • Maximum temperature is 150F
    • Minimum temperature is 130F
  • Cold Water Supply
    • No minimum temperature requirement
  • Drain
    • 1-1/2" tailpiece
    • Use open type floor drain for maximum drainage
  • Electrical
    • 120V, single phase, 60 Hz, 6-foot grounded cord included
    • Dedicated 15 amp circuit recommended
    • Power requirement - 3.5 amps
  • Detergent
    • Extra heavy duty, non-foaming, commercial liquid dishwashing detergent is required - .3% concentration
    • Consult local chemical supplier to match detergent with local water conditions
  • Sanitizer
    • Liquid chlorine bleach adjusted to 50 ppm
  • Rinse aid
    • Liquid Rinse aid adjusted for proper sheeting
  • Operation / Capacity
    • 120F minimum wash temp and rinse temp adjustable down to 75F
    • 2 minute 15 second cycle
    • 2-3/4" diameter bar glasses - 41 per cycle
    • 2-1/2" diameter bar lasses - 49 per cycle
    • Maximum glass height 10"
  • Materials
    • 20 gauge stainless steel parts include: cabinet
    • 18 gauge stainless steel parts include: floor and tanks
    • 16 gauge stainless steel parts include: leg mounting brackets and legs
    • 11 gauge stainless steel parts include: drive wheel
  • Service access
    • Front panel is removable for service
Weight
175 lb
Ship Freight Only
Yes
Specifications